EN | FR

Industrial waste



Obsolete radioactive sources, the legacy of radium applications

There are numerous industrial applications for radioactive sources (sealed or unsealed). Industry produces a wide variety of items such as lightning conductors and smoke detectors, which use radioactive products, but the use of radioactive sources for non-destructive testing is by far the most common application. Non-destructive testing is used to characterise materials without affecting their integrity.

Radioactive sources in industry
Artificial radioelements are often used in industry, e.g. for inspecting welding or measuring the thickness of materials using gauges that contain a source of radiation. Depending on the half-life of the radioelement in question, their limited service life makes some sources unusable after a few months or years. There is a special monitoring system for tracking all sealed sources and their movements. The most common type of smoke detector uses a small americium-241 source. It is estimated that between 6 and 8 million of these smoke detectors are installed.
ANDRA

Examples of use:

- inspection of welds by means of gamma radiography (iridium-192 or cobalt-60);
- measurement of the level or thickness of materials such as paper, fabric, plastic, or thin metal using gauges (krypton-85, caesium-137, americium-241, cobalt-60 or prometheum-147);
- detection and dosing of molecules in gas chromatography, for products such as pesticides, explosives and drugs;
- control and monitoring of the operation of nuclear reactors.
- Industry also uses powerful sources of radiation in irradiation facilities. Like medicine, it makes use of the biological effects of radiation on living matter for various applications.

These applications include:
- sterilisation of medical equipment and pharmaceutical products;
- conservation of certain food products in which it destroys the micro-organisms and parasites;
- inhibition of germination (e.g. of potatoes), removal of parasites from cereals and fruits, slowing of the physiological processes of decomposition by means of low-dose irradiation;
- extension of the shelf life of foodstuffs by means of medium-dose irradiation;
- sterilisation by means of high-dose irradiation of meats, spices and prepared foods.

Former Bayard factory
Until the 1950s this Bayard factory at Saint-Nicolas d’Aliermont in Seine-Maritime manufactured alarm clocks with luminous hands. The hands were made to glow in the dark by means of paint containing a small amount of radium. The quantities were infinitesimal, but the site of the former factory had to be decontaminated.
ANDRA

ANDRA is also responsible for dealing with the legacy of former industrial applications of radium. For example, until the 1950s, Bayard alarm clocks used paint containing a small amount of radium to make the hands glow in the dark. These factories were closed a long time ago, but the buildings, just like some laboratory buildings, have to be decontaminated. These materials, which may contain traces of radium, are the source of some of the radium-bearing waste, which is low-level long-lived waste (LLW-LL). ANDRA is conducting research on the future and management of this waste.

Access to page in french.