There are several industrial techniques currently used to produce electricity from nuclear fission. These different techniques are referred to as 'reactor families" or "reactor brands'. Each brand of reactors corresponds to the choice of a few essential parameters or options.
The most important is the choice of the fuel and its degree of enrichment in fissile isotopes. This degree determines the type of neutrons, slow or fast, involved in the fission reactions. Uranium fuel, natural moderately enriched in uranium-235, will require a moderator to slow neutrons, whereas reactors with fuel rich in fissile isotopes (U-235 or Pu-239) operate with fast neutrons. Today all nuclear power plants (NPP) are fuelled by uranium: whether natural, enriched, or containing a part of fissile plutonium-239.
For slow neutron reactors, there also has to be a choice of the moderator - the material which slows the neutrons down - which is either graphite, heavy water or ordinary water. There are no moderator in fast neutron reactors.
In order to evacuate the heat away from the reactor core, the coolant should be an efficient heat conveying-medium not to greedy in capturing neutrons. This 'heat conveying fluid' plays sometimes also the part of moderator. This is the case with heavy or ordinary light water, which can be boiling or under pressure. The coolant can be gaseous (pressurized carbon dioxide or helium) or even a molten metal like molten sodium or lead in the case of fast neutrons reactors.
There are other important technical parameters, such as the layout of the fuel in the reactor's core with respect to the coolant and moderator, the fuel cladding and its packaging , the nature and number of heat exchangers.
Some reactors, the first to be developed after the Second World War, are for military use. It was less to produce electricity to obtain weapon-grade plutonium for weapons. These 'plutonigenous” reactors gave birth to civilian reactors using natural uranium as fuel and heavy water or graphite as moderator.
Dominance of light water reactors (LWR)
The repartition of the installed electrical power is characterized by the overwhelming predominance of light water reactors operating with enriched uranium. The graphite reactors are disappearing. Among the natural uranium reactors, only the Canadian family of heavy water CANDU reactors is still well alive.
The family of pressurised water reactors powered by moderately enriched uranium accounts by itself for 60% of the total power produced by nuclear reactors worldwide (80% in Europe). Because of its significance, the PWR family will be discussed in greater detail elsewhere. The promising fast neutron breeders, limited today to a very small number of units but able to extract much more energy from uranium than now, await the possible arrival of Generation IV reactors. The ADS, reactors coupled to a particle accelerator, would play the part of waste burners within the panoply of reactors of the far future.
Access to page in french